Triton RBA-09-AD2-CAX-A1, 19" wall cabinet, 9U, 600x295mm, two-part, grey

Triton RBA-09-AD2-CAX-A1, 19" wall cabinet, 9U, 600x295mm, two-part, grey

SKU: 01909T
GTIN: 8595105017609
Category: Wall cabinets
Manufacturers:

Price on request

2 In stock

Description
Reviews

The data and telecommunication cabinet is a very successful version of two-sectioned cabinets. Opening parts of the cabinet enable an easy access to the rear cabinet section. Cabinet has a robust welded construction. High quality processing and the up-to-date technology ensure a perfect look of the cabinet. The cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables almost 180° wide opening of the door. The door can be easily removed and mounted for a change of the door opening direction.EASY ACCESS:Opening parts of the cabinet enable an easy access to the rear cabinet section. You can easily remove the front part of the cabinet after unlocking chain shackles. All parts are interconnected and earthed.ADJUSTABLE VERTICAL RAILSOne pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables.BREAKOUT-TYPE BLANKING PANELSCable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.DESCRIPTION, PURPOSE OF USE

19" two-sectioned wall-mounted cabinet with IP30 protection
Cabinet is to be hanged right on the wall
Cabinet includes two sliding vertical rails.
Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
Max. permissible load of the door is 10 kg
Min. thickness of the surface finish is 65 micrometer
Cabinets are intended for installation of data and telecommunication devices and their distribution systems
The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet

OPERATION CONDITIONSOperation environment:

Office
The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)

Must be protected against:

Mechanical damage
Improper manipulation
A different usage than the cabinet is intended for

Improper manipulation is especially:

Overloading (maximum recommended load exceeding)
Device installation that can influence negatively operation and function of the cabinet or the installed equipment
Change of the construction or design of the cabinet

INSTALLATION OF THE CABINET

This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
To avoid dust penetration in a case where cables lead through some of the cable openings, you can seal it using a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply).

ENVIRONMENT PROTECTION

All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations

Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6, 1x blanking panel with brush
Material: Safety hardened glass 5 mm thick, steel sheet
Dimensions (HxWxD in mm): 500 x 600 x 295
Door size (HxW in mm): 395 x 516
Net weight: 15.2 kg net / Gross weight: 15.5 kg

Item weight:	15,69 kg

There are no reviews yet.